10*38引线式防水保险丝座H3-1038A

1 外壳 holderPVC，阻燃度 94 V0，环保，散热，(PVC, flame retardant 94 V0, environmental protection,
heat dissipation.)
2 金属端子 Terminal H62 黄铜镀镍(H62 brass nickel plating)。
3 线缆  UL标准线材8~14AWG 两端各外露（可根据客户要求适配）。UL standard wire 8~14AWG is exposed at both ends (can be adapted according to customer requirements)
4、轴向拉力强度 / Lead Pull Strength 200 牛顿 10±1 秒 /200N for 10±1 Seconds

5、 使用温度范围 Operating Temperature`
-40 ℃ ～+130 ℃ 。
冷热冲击实验 Cold and Heat Shock Test
-40 ℃温度持续 30Min --- 25 ℃ 持续 5min---- 130 ℃持续 30min -----25 ℃持续 5min 为 1 个循环
-40 ℃ for 30Min --- 25 ℃ for 5min---- 130 ℃ for 30min -----25 ℃ for 5min 1 cyccles
100 各循环后，防水特性测试达到 IP67 防水标准要求。
After 100 cycles, the waterproofing characteristic test meets the IP67 waterproofing standard requirements.
6、 防水座子反复拉拔测试 1000 次，始终保持密封强度，防水等级达到 IP67 防水要求
The waterproof seat is repeatedly pulled out and tested 1000 times, and the sealing strength is always maintained. The waterproof grade meets the waterproof requirement of IP67.

7、拔开保险丝座子，将 10*38 的保险丝装入保险丝盒子，上下盖压紧，再装以卡扣，将装有保险丝的保险丝盒两端引线串接在需要保护的电路中。
Unplug the fuse holder, put the 10*38 fuse into the fuse box, press the upper and lower cover tightly, and then install the buckle. Connect the fuse box with the fuse leads at both ends in series in the circuit that needs protection.