Description：
The lead free NANO2 Slo-Blo® fuse is RoHS compliant,Halogen Free and 100% lead-free. This product is fully compatible with lead-free solder alloys and higher temperature profiles associated with lead-free assembly.The Slo-Blo® design has enhanced inrush withstand characteristics over the NANO2 Fast-Acting Fuse. The unique time delay feature of this fuse design helps solve the problem of nuisance “opening” by accommodating inrush currents that normally cause a fast-acting fuse to open.
Features：
• Lead-free and Halogen Free • Slo-Blo® • Small size • Wide range of current ratings available • Wide operating temperature range
• Low temperature de-rating
Applications：
Secondary protection for space constrained applications:
• Notebook PC • LCD/PDP TV • LCD monitor • LCD/PDP panel • LCD backlight inverter • Portable DVD player • Power supply
• Networking • PC server • Cooling fan system • Storage system • Telecom system • Wireless basestation • Game console
• Office Automation equipment • Battery charging circuit protection • Industrial equipment• Medical equipment • Automotive
Electrical Characteristics for Series
|
% of Ampere rating |
OpeningTime |
|
100% |
4 hours, Minimum |
|
200% |
1 sec., Min.; 60 sec., Max. |
|
300% |
0.2 sec., Min.; 3 sec., Max |
|
800% |
0.02 sec., Min.; 0.1 sec., Max. |
Electrical Specifications by Item
|
Ampere Rating (A) |
Amp Code |
MaxVoltage Rating(V) |
Interrupting Rating |
Nominal Cold Resistance (Ohms) |
Nominal Melting I2t (A2sec) |
Agency Approvals |
|
|
|
|
||||||
|
0.375 |
.375 |
125/250 |
50 amperes @125/250 VAC/VDC PSE:100amperes @100 VAC |
1.5130 |
0.088 |
x |
|
|
0.500 |
.500 |
125/250 |
0.7633 |
0.258 |
x |
|
|
|
0.750 |
.750 |
125/250 |
0.4080 |
0.847 |
x |
|
|
|
1.00 |
001. |
125/250 |
0.2516 |
1.76 |
x |
x |
|
|
1.50 |
01.5 |
125/250 |
0.1186 |
4.70 |
x |
x |
|
|
2.00 |
002. |
125/250 |
0.0708 |
6.76 |
x |
x |
|
|
2.50 |
02.5 |
125/250 |
0.0400 |
13.18 |
x |
x |
|
|
3.00 |
003. |
125/250 |
0.0352 |
19.55 |
x |
x |
|
|
3.50 |
03.5 |
125/250 |
0.0261 |
32.70 |
x |
x |
|
|
4.00 |
004. |
125/250 |
0.0227 |
40.80 |
x |
x |
|
|
5.00 |
005. |
125/250 |
0.0171 |
59.59 |
x |
x |
|
|
6.00 |
006. |
125/250 |
0.0168 |
61.38 |
|
|
|
|
7.00 |
007. |
125/250 |
0.0161 |
63.50 |
|
|
|
|
8.00 |
008. |
125/250 |
0.0153 |
65.80 |
|
|
|
|
10.00 |
010. |
125/250 |
0.0145 |
70.31 |
|
|
|
|
12.00 |
012. |
125/250 |
0.0115 |
80.52 |
|
|
|
Notes: - l2t calculated at 8ms. Resistance is measured at 10% of rated current, 25ºC
Temperature Derating Curve
Notes:
1. Derating depicted in this curve is in addition to the standard derating of 20% for continuous operation.
Example:For continuous operation at 75 degrees celsius, the fuse should be derated as follows:I = (0.80)(0.85)IRAT= (0.68)IRAT
Average Time Current Curves
Soldering Parameters
|
Reflow Condition |
Pb – Free assembly |
|
Pre Heat |
- Temperature Min (Ts(min)) 150°C |
|
- Temperature Max (Ts(max)) 200°C |
|
|
- Time (Min to Max) (ts) 60 – 120 secs |
|
|
Average ramp up rate (Liquidus Temp (TL) to peak |
3°C/second max. |
|
TS(max) to TL - Ramp-up Rate |
3°C/second max. |
|
Reflow |
- Temperature (TL) (Liquidus) 217°C |
|
- Temperature (tL) 60 – 90 seconds |
|
|
Peak Temperature (TP) |
260+0/–5 °C |
|
Time within 5°C of actual peak Temperature (tp) |
20 – 40 seconds |
|
Ramp-down Rate |
5°C/second max. |
|
Time 25°C to peak Temperature (TP) |
8 minutes max. |
|
Do not exceed |
260°C |
|
Wave Soldering Parameters |
260°C Peak Temperature,3 seconds max. |
Product Characteristics
|
Materials |
Body: Ceramic Terminations: Gold-plated Caps |
|
Product Marking |
Brand, Amperage Rating |
|
Operating Temperature |
-55°C to 125/250°C |
|
Moisture Sensitivity Level |
Level 1, J-STD-020C |
|
Solderability |
MIL-STD-202, Method 208 |
|
Insulation Resistance (after Opening) |
MIL-STD-202, Method 302, Test ConditionA (10,000 ohms minimum) |
|
Thermal Shock |
MIL-STD-202, Method 107, Test Condition B, 5 cycles, -65°C to 125/250°C, 15 minutes @ each extreme |
|
Mechanical Shock |
MIL-STD-202, Method 213, Test I:Deenergized. 100G’s pk amplitude, sawtooth wave 6ms duration, 3 cycles XYZ+xyz = 18 shocks |
|
Vibration |
MIL-STD-202, Method 201: 0.03" amplitude, 10-55 Hz in 1 min. 2hrs each XYZ=6hrs |
|
Moisture Resistance |
MIL-STD-202, Method 106, 10 cycles |
|
Salt Spray |
MIL-STD-202, Method 101, Test Condition B (48hrs) |
|
Resistance to Soldering Heat |
MIL-STD-202, Method 210, Test condition B (10 sec at 260°C) |
Dimensions
Packaging
|
packaging Option |
packaging Specification |
Quantity |
Quantity &packaging code |
|
12mm Tape and Reel |
EIA RS-481-2 (IEC 286, part 3) |
1000 |
WR |
上一篇：SMD1206 一次性贴片保险丝
在线反馈
2024新澳门原料大全 版权所有 粤ICP备17014169号 技术支持：东莞网站建设
